UV water renovationUV coated surface and bottom water bug fixes, excellent adhesion. The role of UV is not the original paint removed, but from linking to the original role of the film hinges on the re-UV spray UV, to attachment, can greatly improve the process yield, to save costs.

Two, UV renovated aquatic features: 1, Appearance: yellowish liquid 2, the viscosity (Iwata 2 # cup): 8 ± 1 seconds 3, low VOC emissions, less pollution, is the new green paint.

Three, UUV renovation of water construction technology (1) coating process: (bad bad product → polished) surface cleaning spray → → spraying dry for 1-2 minutes turning → turn → IR UV varnish spray stream level (60 ± 10 ℃ × 4 ~ 6min) → UV curing (700 ± 100mj/cm2) → test, finished product. Construction Viscosity: 8 ± 1 seconds (Iwata Cup # 2) working pressure :3-4Kg / cm2 (2) Construction requirements: 1 turn to use the same UV spray finish; 2, defective products polished with white oil cloth surface, to protect its clean enough; 3, attention turned spray coating thickness, usually with low-flow, cross-shaped spray evenly; 4, turn the UV spray finish to protect the gloss and other appearance in the case, as better than normal spray paint thinner.

Four, UV renovation of water Packing: 4 L / cards 18 L / drum 25 kg / barrel.

Five, UV renovation of water Note: 1, Avoid contact with eyes or skin, such as inadvertently stained, with plenty of water and soap and water, if necessary, seek immediate medical attention. 2, the product shelf life is 12 months, should be stored in a cool (30 ℃ or less) dark place, well-ventilated place away from sources of ignition. 3, UV renovation of the water is turned on in time sealed in order to avoid failure.